Yufeng Refractory have been serving the aluminum industry form many years, we provide complete refractory solutions  for melting and holding furnace used in production of aluminum and aluminum alloys.

Especially, for the working lining which is directly contacted with molten aluminum, we developed and recommend low cement castable with non-wetting agent addition to minimize the slag formation of the corundum and achieve long working life of the furnace.

Such series products have undergone rigorous aluminum immersion testing, with special structure design and new generation of non-wetting agent, feature with good aluminum resistance, alkaline resistance, and excellent strength.

Yufeng Refractory have been serving the aluminum industry form many years, we provide complete refractory solutions  for melting and holding furnace used in production of aluminum and aluminum alloys
Especially, for the working lining which is directly contacted with molten aluminum, we developed and recommend low cement castable with non-wetting agent addition to minimize the slag formation of the corundum and achieve long working life of the furnace. 

 

More than 20 years, we engaged in develop and provide complete solutions for the cement industry.
In the context of national energy conservation and environmental protection policies, we comprehensively considers the requirements of cement production process , refractory performance ,use and damage mechanism ,developed series of high-performance synthetic raw materials and product with energy-saving , environmental friendly.


 

Yufeng Refractory manufacture high quality refractories for the glass industry , equipped with advanced facility ,including friction press ,Isotatic press ,Shuttle Kiln , Tunnel Kiln , complete set of processing machine , ,pre-assembly platform. This will promise our material with high stability ,good thermal shock resistance ,low thermal expansion rate ,chemical stability , corrosion resistance and precise size . Working with us , you will get secure of excellent material and consistent properties aligned with glass industry standard.

 

Mold filling of heavy ingot can be performed in two ways: top pouring and bottom pouring,
Top pouring, the molten steel is more exposed to air, suffering from reoxidation problems. As the pouring steel impinges on the melt surface inside the mold, it carries reoxidation products and mold powder, floating on it, back into the bulk, resulting in macro-inclusions. Moreover, during filling, metal splash adheres to the mold walls and produces surface defects on the ingot skin, which subsequently needs surface conditioning. This makes the top pouring method not suitable for high-quality steels.
 

Leading kiln furniture suppliers of Ceramic Industry

We understand your production process ,whatever you manufacture table ware ,sanitary ware ,technical ceramics. We will be there to provide complete solution to meet your requirements to improve production processes, increasing cost efficiency and reducing environmental impact.  

 

   No.108 WANJIE ROAD , HIGH-TECH ZONE, ZIBO,SHANDONG,CHINA 
   +86-0533-5207252
  +86-0533-5207253
   tom@yufengrefractory.com        
   yufeng_refractory